When configuring eBGP peers between peers that are not directly connected you use the - 'R2(config-router)#neighbor 192.168.10.1 ebgp-multihop [hops]' - cmd on both peers.
On an iBGP router that is a border router configure- 'R2(config-router)#neighbor 172.16.30.1 next-hop-self' - to advertise the next hop as it's self to the rest of the iBGP peers
Send the default route information to a specific peer - 'R2(config-router)#neighbor 172.16.30.1 default-originate'
3 well know mandatory BGP attributes - AS_PATH, NEXT_HOP, Origin
No comments:
Post a Comment